How to Format an APA 7 Student Paper in Word

Open your Word document (.docx) in Cue Office. Set 1-inch margins on all sides, use double spacing for the title page and body, and add automatic page numbers in the upper-right corner, starting with 1 on the title page. A fictional campus shuttle paper shows how to set up the title page and body.

Set margins, font, and line spacing

Go to Layout → Margins → Normal to select standard margins, confirming that Top, Bottom, Left, and Right all show 1 inch (2.54 cm).

Normal option in the Margins menu showing 1 inch on all four sides
Select Normal from the Margins menu to leave 1 inch on all four sides.

Select all text across both the title page and body text in the document editor, go to Home and set the font to Arial 11, then select Line Spacing → 2.0. Arial 11 is one of the fonts permitted by APA 7. Keep the body text double-spaced, and set both space before and space after paragraphs to 0.

2.0 line spacing selected in the Line Spacing menu
Select 2.0 in the Line Spacing menu.

Format the title page and body

Place the paper title approximately three to four lines down from the top margin, centered and bolded. Leave one blank double-spaced line beneath the title, then center and enter the author's name, department and institution, course number and name, instructor name, and assignment due date.

Completed title page with page number 1 in top right, bold centered title, and five lines of centered information
The title on the title page is bolded, with one blank line between the title and author name.

Start the body on the next page and repeat the paper title at the top in bold, centered text. Left-align each body paragraph and indent the first line by 0.5 inches (1.27 cm). The example also uses centered, bold text for the Level 1 heading Observations. The body continues naturally onto page 3.

First page of body text showing page number 2 in top right, repeated bold centered title, and indented first line below
Repeat the paper title on the first page of the body text; left-align body paragraphs and indent the first line.

If your instructor provided an assignment template, check the title page details and paragraph indents against it before submitting.

Start page numbering on the title page

Select Insert → Page Number → Top Right, then verify that pages 1 and 2 display in the top-right corner of the title page and the first body page, respectively. If your course has specific font requirements for page numbers, check the header and the exported PDF separately.

Page Number menu on the Insert toolbar showing Top Right
Select Top Right from the Page Number menu.

Reopen the DOCX and check the PDF

Save and reopen the DOCX. Check the title page alignment and the blank line after the title, the first-line indents in the body, and the page numbers in the upper-right corner. Then choose File → Export as PDF… and open the PDF to check where pages break. The shuttle paper has three pages, numbered 1, 2, and 3.

PDF thumbnails showing three pages, with page number 3 printed in top right of third page and text continuing naturally
The exported PDF has three pages, displaying 3 in the top-right corner of the continued body page.

Apply formatting with Cue AI

If the title page fields and body text are already written, and 1-inch margins and automatic page numbers are in place, you can ask Cue AI to adjust the font, line spacing, title page, and body indents all at once.

Format the existing student paper for APA 7 without rewriting any text. Preserve the one-inch margins, the right-aligned automatic page numbers from page 1, and the page break before the repeated title. Use Arial 11 and double spacing throughout. Set paragraph spacing before and after to 0 except on the title page: center all six lines, make the first title bold with 66 pt before it and set 25 pt before Morgan Lee. Center and bold the repeated title and the Observations heading. Left-align every body paragraph and indent its first line by 0.5 inches. Apply this directly to the document.

Check the title page after the edit. In this example, 66 pt before the title and 25 pt before the author produce the desired spacing. If you use a different font or template, check that the title sits three to four lines below the top margin and that one blank double-spaced line separates it from the author. Cue AI changed the title and body to Arial 11 and preserved the automatic page numbers. The page numbers kept their existing header font and appear in a different typeface from the body in the exported PDF. If your course requires the same font throughout, check the header and the exported PDF separately.

Title page updated by Cue AI, showing bold centered title and centered author and course details
The title page modified by Cue AI displays centered title, author, and course information, with page number 1 still in the top right.

Practice with the campus shuttle paper

Expand the full example

This course paper compares fictional wait records at two shuttle stops, including a title page and continuous body text. You can copy the raw text below to practice; see the PDF screenshots for the completed layout.

Comparing Campus Shuttle Wait Times
Morgan Lee
Department of Urban Studies, Example College
URB 101: Introduction to Transportation
Professor Jordan Ellis
November 10, 2026

Comparing Campus Shuttle Wait Times
The campus shuttle connects the residence halls with the main classroom buildings. Students can board at the North Residence stop or at Library Plaza, and the two stops serve different parts of campus. This exercise asks a practical question: during the same weekday morning period, how much time would a student spend waiting at each stop? The comparison focuses on time at the stop, which students can observe with a clock and a timetable.

In this illustrative exercise, one observer stood at each stop from 8:15 to 9:00 a.m. on four weekdays. The observers recorded the time when the front doors of an eastbound shuttle opened. They used the same clock settings and noted when a vehicle was full. Both observers waited in the designated boarding area so they could see which vehicles actually stopped. At the end of each morning, they checked their notes against the timetable to identify scheduled trips with no corresponding arrival.

To compare the stops, the observers picked the same three arrival times for an imaginary passenger on each morning. For each time, they counted the minutes until the next shuttle with space to board. This produced 12 comparable waits per stop. For example, a passenger arriving at 8:20 a.m. and boarding at 8:27 a.m. had a seven-minute wait. When no shuttle arrived before the observation period ended, the observers recorded the wait as incomplete and kept it separate from the completed waits.

Observations
In the fictional records, the typical completed wait was six minutes at North Residence and nine minutes at Library Plaza. The longest waits at Library Plaza occurred when two shuttles arrived close together after a gap in service. On one morning, a full shuttle stopped at the plaza, and the imaginary passenger had to wait for the following vehicle. Recording that event separately helped explain why a stop can appear well served on the timetable while a passenger still waits longer to board.

The two stops also differ in how easy it is to judge when a shuttle will arrive. At North Residence, the waiting area faces the street the shuttle turns onto. At Library Plaza, the view is blocked until the shuttle reaches the curb. That difference may affect how long a wait feels, even when two passengers wait the same number of minutes.

The comparison suggests two questions for a follow-up exercise. First, are the longer plaza waits concentrated around a particular class start time? Second, do the longer waits persist outside the morning period? Observing another week and adding an afternoon window would help address both questions. A later exercise could also record the walk to each stop and the ride to the classroom buildings, so the comparison would include the full trip students make to class.
Full title page view with page number 1 in top right and centered title and student details
Page 1 · Title Page
Full view of first body page with repeated title, first-line body indents, and Observations heading
Page 2 · Body Start
Full view of body continuation page with page number 3 in top right and formatted text continuing
Page 3 · Body Continuation

Turn your paper into a class presentation

If your APA paper leads to a research report or class presentation, keep the original survey records in an Excel spreadsheet (.xlsx), write up the findings in a Word document (.docx), and move the charts you want to discuss into a PowerPoint presentation (.pptx). You can open and edit all three file types for free in Cue Office. After exporting your report as a PDF, use the free PDF reader to check the page breaks. Advanced PDF editing tools are available with a paid plan.

When you’re ready to present, give Cue AI your checked notes on the research question, findings, and limitations and ask it to draft slides. For the campus shuttle paper, you could compare wait times at the two stops on one slide and explain the observation period and sample limits on the next. In Cue Office, check the figures against the original spreadsheet and keep the note about simulated data next to the chart. Download Cue Office for free